Jack's Big Music Show T-shirt Iron-On

Do you know any Jack's Big Music Show fanatics? We suspect you might. Make "concert t-shirts" for your little (or, should we say "BIG") fans.

Watch all your favorite shows every day on Nick Jr

Materials

• Iron-on transfer paper
• Jack's Big Music T-shirt Iron On (Reversed)
• Jack's Big Music T-shirt Iron On (Non-Reversed)
• Scissors
• Iron
• Heavy bath towel
• T-shirt or other clothing
• Ink-jet fabric sheets (optional)
• Fabric glue (optional)

Directions

1. Step 1

   Choose the appropriate iron-on image and the type of iron-on transfer paper based on the color of your fabric. For dark-colored fabrics, print <a href="jack-big-music-iron-on.jhtml"><u>Jack's Big Music T-shirt Iron On (Non-Reversed)</u></a> onto transfer paper for dark clothing. The image is ironed onto the fabric faceup. For lighter fabrics, print <a href="jack-big-music-iron-on-rev.jhtml"><u>Jack's Big Music T-shirt Iron On (Reversed)</u></a> onto transfer paper for light clothing. The image is ironed facedown onto the fabric.

2. Step 2

   Place the iron-on transfer paper into your ink-jet color printer as indicated on the package. Print a test on regular paper first to make sure you've chosen the right design for the type of iron-on paper you have. Set the printable aside for a few minutes to dry, and then cut out the image--cutting close to the colored edge of the image. Kids can definitely help with this part.

3. Step 3

   Preheat the iron and fold the towel into thirds on a countertop or other hard surface. To further protect your countertop, you may want to place a magazine or a large book under the towel. For best results, though, don't use your ironing board.

4. Step 4

   Place the cut-out image on the T-shirt. For non-reversed image cut-out, peel off the backing first. Cover with the protective sheet that comes with your transfer paper (if provided) and iron the image with firm and steady pressure in a circular motion. Start at one corner and work your way slowly to the opposite corner, and then do the same for the other two corners. Finish by moving the iron in a circular motion around the entire area for 10-15 seconds using steady pressure.

5. Step 5

   If the image was ironed facedown, starting at one corner, slowly peel the paper backing away from the garment.

6. Alternative:

   Print the non-reversed iron-on design onto ink-jet fabric sheets and allow to dry for at least 10 minutes. When dry, your child can cut out the image, peel it away from the backing, and stick it directly to the garment using fabric glue.